| A1 | 33 mm |
|
| JB | 82 mm |
|
| b | 34 mm | width rail |
| A2 | 9 mm |
|
| L1 | 111 mm |
|
| LS | 2.2 mm |
|
| JL | 62 mm |
|
| JLZ | 52 mm |
|
| H1 | 6.5 mm |
|
| H4 | 20.5 mm |
|
| H5 | 8 mm |
|
| T5 | 12 mm |
|
| T6 | 10.9 mm |
|
| G2 | M10 | fixing screws below (DIN ISO 4762-12.9) |
| G2 MA | 41 Nm | maximum tightening torque 3 |
| K3 | M8 | fixing screws below (DIN ISO 4762-12.9) |
| K3 MA | 41 Nm | maximum tightening torque 3 |
| K6 | M8 | fixing screws below (DIN 7984-8.8) |
| K6 MA | 24 Nm | maximum tightening torque 3 |
| D2 | 8.6 mm | bore diameter |
| A3 | 6.6 mm | position lubrication connector |
| N3 | M6 | lubrication connector |
| t N3 | 6 mm | maximum permissible screw depth for lubrication connectors |
| A4 | 5.6 mm | position lubrication connector |
| N4 | 6 | lubrication connector |
| t N4 | 6 mm | maximum permissible screw depth for lubrication connectors |
| JL6 | 37.4 mm | position lubrication connector |
| N2 | 6 mm | max. diameter of lubrication hole in adjacent construction 4 |
| JL5 | 27.2 mm | position lubrication connector 5 |
| GS | M4x4 |
|
| O | 10x1,5 mm | O-Ring DIN 3771 |
